Research and Development > JFE TECHNICAL REPORT > No.9 Special Issue on "Analytical Sciences and Microstructural Characterization″ and "Steel Sheet for Can-making″
No.9 March 2007 - Special Issue on "Analytical Sciences and Microstructural Characterization″ and "Steel Sheet for Can-making″
Special Issue on Analytical Sciences and Microstructural Characterization
Foreword
- Foreword to Analytical Sciences and Microstructural Characterization KAGECHIKA Hiroshi
Articles
- Pinpoint High Spatial Resolution Analysis
Technique for Material Surfaces Using FIB [P1 - P4]
KAWANO Takashi HAMADA Etsuo, et al - Analysis of Nanometer-Sized Precipitates Using
Advanced TEM [P5 - P11]
YAMADA Katsumi SATO Kaoru, et al - Quantitative Chemical State Analysis of Ti
and Mo in a High Strength Steel Using X-Ray Absorption Fine Structure (XAFS) [P12 - P15]
NAGOSHI Masayasu KAWANO Takashi, et al - Determination of Trace Amounts of Mercury, Lead, and Cadmium in Steel and Iron Ore [P16 - P23]
FUJIMOTO Kyoko CHINO Atsushi - Direct Determination of Trace Elements in Steel by Laser Ablation/ICP-MS [P24 - P30]
ISHIDA Tomoharu AKIYOSHI Takanori - On-site Water Quality Monitoring Technology for Wastewater Treatment Plants [P31 - P36]
MIYATA Jun NAKAHARA Keisuke - Analysis of Chemical States of Heavy Metals in Environmental Samples Using XFAS [P37 - P42]
FUJIWARA Shigeki KAWANO Takashi, et al - Simplifi ed Analytical Technology for Dioxins in Fly Ash Using Flame Ionization Detector Gas Chromatography [P43 - P46]
HIRAYAMA Atsushi SHIOMITSU Tohru, et al
Special Issue on Steel Sheet for Can-making
Foreword
- Foreword to Steel Sheet for Can-making IWAMOTO Nobuhiko
Articles
- Development of Laminated Tin Free Steel (TFS) "UNIVERSAL BRITE®″ Type F for Food Cans [P49- P53]
YAMANAKA Yoichiro IWASA Hiroki, et al - New Resin-Film Laminated Steel Sheet for 18 l Cans and Pail Cans "UNIVERSAL BRITE®″ Type E [P54- P59]
SUZUKI Takeshi WATANABE Shinsuke - Automatic Surface Inspection System for Tin Mill Black Plate (TMBP) [P60 - P63]
SASAKI Toshihiro TAKADA Hideki, et al - Development of Surface Detector for No. 3 Tin Temper Mill (3TMP) [P64- P69]
SHIGENO Masahiko YAMAUCHI Kenji, et al - An On-Line Detection System for Nonmetallic Inclusions in Tin Mill Black Plate for Drawing-Redrawing-Can-Making [P70 - P75]
ARATANI Makoto TOMURA Yasuo, et al - Conversion from Halogen Bath to Environment-Friendly Methane Sulfonic Acid (MSA) Bath in Electrolytic Tinning Line (ETL) at East Japan Works (Chiba), JFE Steel [P76 - P79]
NOZAKI Takuya YUUKI Kei, et al
General Issue
Articles
- New Accelerated Corrosion Test "ACTE″ for Zinc-Coated Steel Sheets Used in Electrical Appliances [P80 - P86]
KAJIYAMA Hiroshi FUJITA Sakae, et al
New Products & Technologies
- New Activated Carbon Adsorption Device "JFE-Gas-Clean-DX″ [P87 - P88] [PDF 2P/58KB]
