KAWASAKI STEEL TECHNICAL REPORT No.13 ( September 1985 ) |
Automatic Operation System for Yard Machines Yukio Sato, Minoru Sugawara, Yoshiteru Tagawa, Hiroyasu Takahashi, Yoshio Fukui, Noboru Yamashita p.1-11 PDF FullText: 11P/521kb |
| Computer Control System for Coal Yard Operation
at Mizushima Works Shizuki Kasaoka, Osamu Okamoto, Yuzuru Takizawa p.12-19 PDF FullText: 8P/387kb |
| Ladle Refining Performance of Pulsating Mixing
(PM) Process with 250-t BOF Melts Norio Sumita, Yukio Oguchi, Tetsuya Fujii, Toshihiko Emi, Arata Ueda, Takuo Imai p.20-31 PDF FullText: 12P/501kb |
| Revamping of Billet Mill for a Continuous
and Synchronized Operation Nobutsune Hirai, Masanori Yoshihara, Teruyuki Nakanisi p.32-44 PDF FullText: 13P/658kb |
| Development of a Highly Computer-Controlled
Vehicle (HCCV) System for Hot Cast
Blooms Teruyuki Nakanisi, Yoshio Yoshimura, Tsuneo Seto, Kazushi Baba, Hiroshi Arimitsu, Shuzo Watanabe p.45-52 PDF FullText: 8P/425kb |
| Development of On-Line Quality Assurance
System in the New Billet Mill Eisuke Yamanaka, Junjiro Yamasaki, Yasuhiro Nakagawa, Takuma Shibayama, Takayoshi Miura p.53-66 PDF FullText: 14P/609kb |
| Properties of YP 36-kgf/mm2 Class Hull Structural
Steel Plates Produced by Accelerated
Control
Cooling Process Yoshifumi Sannomiya, Hiroshi Nishizaki, Jun Nagai, Chiaki Shiga, Hisae Terashima, Toshihiro Sekine p.67-76 PDF FullText: 10P/372kb |
| Structural Steel Plates for Arctic Use Produced
by Multipurpose Accelerated Cooling
System Yuji Kusuhara, Eiji Kobayashi, Fumihiro Ohnishi, Ikuo Hirai, Keniti Amano, Ryo Tarui p.77-82 PDF FullText: 6P/239kb |
| Fatigue Properties of 50-kgf/mm2 High-Strength
Hull Structural Steels Manufactured
by Thermomechanical
Control Process Shigeto Matsumoto, Asao Narumoto, Chiaki Shiga, Syuzo Ueda p.83-96 PDF FullText: 14P/572kb |
| Fe-36% Ni Invar Type Alloy KLN 36 for LNG
Facilities Kiyohiko Nohara, Akio Ejima p.97-108 PDF FullText: 12P/640kb |
| Hydrogen Attack in Cr-Mo Steels and Disbonding
or Austenitic Stainless Weld Overlay Takuichi Imanaka, Jun-ichi Shimomura, Shozaburo Nakano, Koichi Yasuda p.109-119 PDF FullText: 11P/609kb |
| Manufacture of Cask Forgings for Spent Nuclear
Fuel Transport Seimei Karino, Kiyoshi Uchida, Yoshifumi Nakano, Toshikazu Tobe, Katsuhiko Miyata, Ryoji Kodama p.120-128 PDF FullText: 9P/406kb |
| Outline of Advanced Total Information System
for Cold Rolling at Mizushima Works Asaharu Kibata, Syuichi Hirasaki, Kozo Hatakeyama, Hiroaki Ueno, Shigeo Asagoshi, Kazuhiro Hirohata p.129-139 PDF FullText: 11P/519kb |
| An Outline of the Stainless Steel Continuous
Annealing and Pickling Line at Chiba
Works Toshio Watanabe, Yoshio Nakazato, Ryuzo Sato, Hirokazu Takita, Masanobu Ochiai, Minoru Hoshino p.140-148 PDF FullText: 9P/389kb |
| Development of Energy System Toshiharu Maezawa, Shigeru Komiyama, Shyougo Nanbu, Takashi Minematsu, Shigeo Abe p.149-156 PDF FullText: 8P/402kb |
| Improvement of Coke Recovery Ratio in Blast
Furnace Process Toshiro Sawada, Takanari Kawai, Yasunori Serizawa, Kazuo Okumura, Yoshinobu Shinozaki, Seiji Taguchi p.157-166PDF FullText: 10P/476kb |
| Multipurpose Turbine for Blower and Generator Katsunori Yoshida, Hideki Takano, Kenzo Yamaguchi p.167-173 PDF FullText: 7P/276kb |
| High Efficiency Blast Furnace Gas Firing
Power Plant Fuyuki Soma, Hideki Takano, Tokujiro Fujikawa, Kenzo Yamaguchi p.174-180 PDF FullText: 7P/321kb |
| Development of a High Strength Mill Spindle
and Its Strength Evaluation Noriaki Inoue, Sadanori Nakano, Noboru Kawauchi, Kazuaki Hamada, Tadashi Naito p.181-193 PDF FullText: 13P/557kb |
|
Note: Adobe Acrobat Reader is required to view PDF documents. The most recent version of the Adobe Acrobat Reader is available as a free download. bKawasaki-steel Home Pageb bKAWASAKI STEEL TECHNICAL REPORT Top Pageb (c)JFE Steel Corporation, 2003 |