Research and Development > JFE TECHNICAL REPORT > No.16 Special Issue on “Engineering,” “Steel Section Products,” and “Iron and Steel Powders” > “Cleanmix“ HDX Providing High Green Densities and
“Cleanmix“ LEX Eliminating Trouble
in Compaction Process
No.16 Special Issue on “Engineering,” “Steel Section Products,” and “Iron and Steel Powders”
“Cleanmix“ HDX Providing High Green Densities and “Cleanmix“ LEX Eliminating Trouble in Compaction Process
ONO Tomoshige OZAKI Yukiko
Abstract
“Cleanmix“ HDX providing high green densities, and “Cleanmix“ LEX eliminating troubles at compaction process were developed for the purpose of corresponding to the high-strength and complicated form of sintered parts.“Cleanmix“ HDX realizes high green density, 7.3 Mg/m3, at 686 MPa, which is equal density obtained by warm compaction processes. For HDX, a compression process was analysed and the factor controlling green density was considered with the filling die density. And it was confirmed that the green density of HDX is not affected by die temperature. It was certified that the lubricant for LEX has high lubricity at low lubricant concentration.
Full Pages
