KAWASAKI STEEL TECHNICAL REPORT
No.37 ( October 1997 )
|
| Rolling Technology and Modernization of Chiba
Works |
FOREWORD
Teruyuki Nishide
(PDF FullText: 1P./40kb)
FOREWORD
Fumiya Yanagishima
(PDF FullText: 2P./75kb) |
Development of Size-Free Rolling Technology
for Wire Rod and Bar Using 4-Roll Mill
Hidenori Kondo, Ryo Takeda, Kazuo Ohmori,
Norio Kunita
p.5-12 PDF FullText: 8P/352kb
Development of Centrifugal Cast Roll with
High Wear Resistance for Finishing
Stands
of Hot Strip Mill
Kenji Ichino, Yoshihiro Kataoka, Tomoya
Koseki
p.13-18 PDF FullText: 6P/318kb
Development of Advanced Transverse Thickness
Profile Control of Thin Hard Steel
Strips
at Tandem Cold Rolling Mill
Toshiki Hiruta, Isao Akagi, Narihito
Mizushima
p.19-24 PDF FullText: 6P/269kb
Technologies for High Speed Rolling and Gauge
Control in Cold Tandem Mill for Ultra-Thin
Gauge Strip
Tomohiro Kaneko, Hiroaki Masuda, Kohei
Takezawa
p.25-32 PDF FullText: 8P/368kb
Overview of the Modernization of Chiba Works
Hirosuke Yamada
p.33-41 PDF FullText: 9P/562kb
Construction of New Stainless Steelmaking
Shop with Highly Flexible Raw Material Choice:Construction
and Operationof No. 4 Steelmaking Shop at
Chiba Works
Yuki Nabeshima, Shigeru Ogura, Sumio
Yamada
p.42-50 PDF FullText: 9P/388kb
Development of High-Efficiency Stainless
Steelmaking by Cr Ore Smelting Reduction
Method
Yasuo Kishimoto, Keizo Taoka, Syuji
Takeuchi
p.51-58 PDF FullText: 8P/370kb
High Quality Production Technology at the
Chiba Works No. 3 Hot Strip Mill
Toshio Imae, Nobuaki Nomura, Sadayuki
Miyoshi
p.59-64 PDF FullText: 6P/228kb
Endless Hot Strip Rolling in the No. 3 Hot
Strip Mill at the Chiba Works
Hideyuki Nikaido, Shigeru Isoyama,
Nobuaki
Nomura, Kanji Hayashi, Kazuo Morimoto,
Hideo
Sakamoto
p.65-72 PDF FullText: 8P/388kb
|
Note: Adobe Acrobat Reader is required to
view PDF documents.
The most recent version of the Adobe Acrobat Reader is available as a free download.
bKawasaki-steel Home Pageb
bKAWASAKI STEEL TECHNICAL REPORT Top Pageb
(c)JFE Steel Corporation, 2003 |