KAWASAKI STEEL TECHNICAL REPORT
No.32 ( March 1995 )
|
Ironmaking Technology, Secondary Refining,
and Center-Segregation Control with
Forging
in CC |
FOREWORD
Kanji Emoto
(PDF FullText: 2p./106kb) |
Blast Furnace Burden Distribution Control
with 3-Parallel Bunker Bell-less Top
Using
Large Amount of Small Sinter
Shigeyuki Hirose, Hideyo Sugawara, Syuichi
Taniyoshi
p.3-8
PDF FullText: 6P/292kb |
Technology for Prolonging Campaign Life of
Blast Furnace
Keiji Kobayashi, Toshiyuki Matsumoto, Katsuhiko
Yanagisawa
p.9-18
PDF FullText: 10P/533kb |
Diagnostic System for Coke-Oven Wall
Takehiro Yazaki, Kenji Suzuki, Yuji Tsukihara
p.19-24
PDF FullText: 6P/298kb |
Analysis of Decarburization Reaction in RH
Degasser and Its Application to Ultra-low
Carbon Steel Production
Yoshiei Kato, Tadasu Kirihara, Tetsuya Fujii
p.25-32
PDF FullText: 8P/412kb |
Development of Hydrogen Gas Injection Method
for Promoting Decarburization of Ultra-low
Carbon Steel in RH Degasser
Koji Yamaguchi, Toshikazu Sakuraya, Kazuhisa
Hamagami
p.33-37
PDF FullText: 5P/262kb |
Optimized Decarburization Process for Stainless
Steel with Combination of Refining in Converter
and RH Degasser
Masanori Nishikoori, Chikashi Tada, Hiroshi
Nishikawa
p.38-44
PDF FullText: 7P/317kb |
Concept of Continuous Forging Process and
Experimental Analysis of Forged Blooms
Shinji Kojima, Hisakazu Mizota, Koichi Kushida
p.45-52
PDF FullText: 8P/401kb |
Production Facilities and Operational Techniques
for Continuous Forging Process
Hajime Bada, Fumio Sudo, Toshitane Matsukawa
p.53-59
PDF FullText: 7P/376kb |
Improvement of Properties of Rods and Bars
by Continuous Forging Process
Masanobu Kawaberi, Yoshiji Yamamoto, Kazuo
Asoh
p.60-68
PDF FullText: 9P/485kb |
Note: Adobe Acrobat Reader is required to
view PDF documents.
The most recent version of the Adobe Acrobat Reader is available as a free download.
bKawasaki-steel Home Pageb
bKAWASAKI STEEL TECHNICAL REPORT Top Pageb
(c)JFE Steel Corporation, 2003 |