JFE ELECTRICAL STEEL SHEETS TOP
JFE Super Core Applications
JFE Super Core JNEX-Core
Features
High frequency core loss curves
Magnetic and mechanical properties
Comparison
JFE Super Core JNHF-Core
Features
High frequency core loss curves
Magnetic properties
Comparison
Products
Uses
JFE G-Core
Types and Applications
Grades and Specifications
Typical Electrical and Magnetic Properties
Typical Mechanical Properties
Dimensions and Tolerances
JFE N-Core
Types and Applications
Grades and Specifications
Typical Electrical and Magnetic Properties
Typical Mechanical Properties
Dimensions and Tolerances
Surface Insulation
Others
Substances of Environmental Concern Dara
 
JFE N-Core Typical Electrical and Magnetic Properties

JN Core
Grade Thickness
mm
(in.)		 Assumed
Density
kg/dm3		 Resistivity
mW-cm 		Core Loss Magnetic Flux Density
T
Watts per kilogram Watts per pound
50Hz 60Hz 50Hz 60Hz
1.0T 1.5T 1.0T 1.5T 1.0T 1.5T 1.0T 1.5T B10 B25 B50 B100
35JN200 0.35
(0.0138)		 7.60 59 0.85 1.98 1.05 2.50 0.39 0.90 0.48 1.13 1.46 1.54 1.64 1.76
35JN210 7.60 59 0.85 2.05 1.05 2.55 0.39 0.93 0.48 1.16 1.47 1.57 1.65 1.77
35JN230 7.60 55 0.89 2.10 1.10 2.60 0.40 0.95 0.50 1.18 1.47 1.57 1.66 1.78
35JN250 7.60 54 0.93 2.25 1.20 2.75 0.42 1.02 0.54 1.25 1.48 1.57 1.66 1.78
35JN270 7.65 54 1.00 2.40 1.25 2.95 0.45 1.09 0.57 1.34 1.48 1.58 1.67 1.79
35JN300 7.65 51 1.10 2.60 1.40 3.20 0.50 1.18 0.64 1.45 1.50 1.59 1.68 1.80
35JN360 7.65 47 1.25 2.95 1.60 3.60 0.57 1.34 0.73 1.63 1.51 1.61 1.69 1.81
35JN440 7.70 38 1.45 3.40 1.77 4.23 0.66 1.54 0.80 1.92 1.53 1.62 1.71 1.82
50JN230 0.50
(0.0197)		 7.60 59 0.95 2.25 1.22 2.93 0.43 1.02 0.55 1.33 1.48 1.57 1.66 1.78
50JN250 7.60 55 1.00 2.40 1.30 3.05 0.45 1.09 0.59 1.38 1.49 1.57 1.67 1.79
50JN270 7.60 55 1.05 2.50 1.35 3.17 0.48 1.13 0.61 1.44 1.49 1.57 1.67 1.80
50JN290 7.60 54 1.08 2.60 1.40 3.25 0.49 1.18 0.64 1.47 1.49 1.58 1.67 1.79
50JN310 7.65 54 1.15 2.70 1.45 3.35 0.52 1.22 0.66 1.52 1.49 1.59 1.67 1.79
50JN350 7.65 51 1.30 3.00 1.64 3.75 0.59 1.36 0.74 1.70 1.50 1.59 1.68 1.80
50JN400 7.65 47 1.45 3.25 1.85 4.05 0.66 1.47 0.84 1.84 1.52 1.61 1.69 1.81
50JN470 7.70 38 1.65 3.65 2.10 4.65 0.75 1.66 0.95 2.11 1.54 1.63 1.71 1.82
50JN600 7.75 32 2.00 4.50 2.50 5.62 0.91 2.04 1.13 2.55 1.52 1.61 1.70 1.81
50JN700 7.80 28 2.52 5.50 3.30 6.90 1.14 2.49 1.50 3.13 1.55 1.65 1.73 1.84
50JN800 7.80 24 2.95 6.30 3.65 8.00 1.34 2.86 1.66 3.63 1.57 1.66 1.74 1.84
50JN1000 7.85 18 3.25 7.20 4.15 9.15 1.47 3.27 1.88 4.15 1.59 1.69 1.75 1.85
50JN1300 7.85 15 3.75 8.10 4.75 10.20 1.70 3.67 2.15 4.63 1.58 1.67 1.76 1.87
65JN800 0.65
(0.0256)		 7.80 28 3.25 7.00 4.20 8.90 1.47 3.18 1.91 4.04 1.56 1.64 1.72 1.82
65JN1600 7.85 15 4.90 9.90 6.15 13.00 2.22 4.49 2.79 5.90 1.57 1.67 1.76 1.86

Note : 1. Values above were measured according to the method JIS C 2550 (2000).
2. Test samples were consisted of half the strips sheared parallel and half sheared transverse to the rolling direction.
3. W15/50 indicates the core loss at 50Hz and 1.5T. B50 indicates the magnetic flux density at 5000A/m.
4. The specimens were tested as sheared.
5. The values shown above are the typical ones, not for guarantee.


JNE Core
Grade Thickness
mm
(in.)		 Assumed
Density
kg/dm3		 Resistivity
mW-cm 		Core Loss Magnetic Flux Density
T
Watts per kilogram Watts per pound
50Hz 60Hz 50Hz 60Hz
1.0T 1.5T 1.0T 1.5T 1.0T 1.5T 1.0T 1.5T B10 B25 B50 B100
35JNE230

0.35
(0.0138)

 7.65 55 0.98 2.15 1.20 2.70 0.44 0.97 0.54 1.22 1.51 1.59 1.69 1.82
35JNE250 7.65 47 1.02 2.30 1.27 2.90 0.46 1.04 0.58 1.31 1.53 1.60 1.70 1.83
35JNE300 7.70 41 1.14 2.60 1.42 3.25 0.52 1.18 0.64 1.47 1.54 1.65 1.72 1.85
50JNE300 0.50
(0.0197)		 7.65 47 1.18 2.70 1.51 3.45 0.53 1.22 0.68 1.56 1.53 1.61 1.70 1.83
50JNE350 7.70 41 1.41 3.10 1.80 3.95 0.64 1.41 0.82 1.79 1.55 1.64 1.73 1.85
50JNE470 7.75 36 1.43 3.20 1.81 4.00 0.65 1.45 0.82 1.82 1.56 1.65 1.74 1.86

Note : 1. Values above were measured according to the method JIS C 2550 (2000).
2. Test samples were consisted of half the strips sheared parallel and half sheared transverse to the rolling direction.
3. W15/50 indicates the core loss at 50Hz and 1.5T. B50 indicates the magnetic flux density at 5000A/m.
4. The specimens were tested as sheared.
5. The values shown above are the typical ones, not for guarantee.


JNEH Core
Grade Thickness
mm
(in.)		 Assumed
Density
kg/dm3		 Resistivity
mW-cm 		Core Loss Magnetic Flux Density
T
Watts per kilogram Watts per pound
50Hz 60Hz 400Hz 50Hz 60Hz 400Hz
1.0T 1.5T 1.0T 1.5T 1.0T 1.0T 1.5T 1.0T 1.5T 1.0T B10 B25 B50 B100
20JNEH1200 0.20
(0.0080)		 7.65 55 0.92 2.13 1.12 2.62 11.0 0.42 0.97 0.51 1.19 4.85 1.46 1.57 1.67 1.78
20JNEH1500 7.65 47 1.09 2.55 1.33 3.13 12.5 0.49 1.16 0.60 1.42 5.67 1.48 1.57 1.66 1.79

Note : 1. Values above were measured according to the method JIS C 2550 (2000).
2. Test samples were consisted of half the strips sheared parallel and half sheared transverse to the rolling direction.
3. W15/50 indicates the core loss at 50Hz and 1.5T. B50 indicates the magnetic flux density at 5000A/m.
4. The specimens were tested as sheared.
5. The values shown above are the typical ones, not for guarantee.


JNA Core
Grade Thickness
mm
(in.)		 Assumed
Density
kg/dm3		 Resistivity
mW-cm 		Core Loss Magnetic Flux Density
T
Watts per kilogram Watts per pound
50Hz 60Hz 50Hz 60Hz
1.0T 1.5T 1.0T 1.5T 1.0T 1.5T 1.0T 1.5T B10 B25 B50 B100
50JNA300 0.50
(0.0197)		 7.75 36 1.21 2.66 1.55 3.44 0.55 1.21 0.70 1.56 1.59 1.66 1.74 1.86
50JNA350 7.80 32 1.40 3.10 1.88 4.05 0.64 1.41 0.85 1.84 1.60 1.68 1.75 1.86
50JNA500 7.80 20 2.08 4.60 2.60 6.02 0.94 2.09 1.18 2.73 1.59 1.68 1.74 1.84
50JNA600 7.85 17 2.30 5.10 3.00 6.65 1.04 2.31 1.36 3.02 1.60 1.67 1.75 1.86

Note : 1. Values above were measured according to the method JIS C 2550 (2000).
2. Test samples were consisted of half the strips sheared parallel and half sheared transverse to the rolling direction.
3. W15/50 indicates the core loss at 50Hz and 1.5T. B50 indicates the magnetic flux density at 5000A/m.
4. The specimens were tested after stress relief annealing.
  Annealing condition : 750ºC (1380ºF) 2hrs. under neutral atmosphere.
5. The values shown above are the typical ones, not for guarantee.