■■■■■■■■■■■■■■■■■■■ 川崎製鉄技報 KAWASAKI STEEL GIHO Vol.30 (1998) No.3 ■■■■■■■■■■■■■■■■■■■ |
高靭性 9%Ni 厚肉鋼板の特性と20 万 kR 級
LNG タンクへの適用性 Properties of High Toughness 9% Ni Heavy Section Steel Plate and Its Applicability to 200 000 kR LNG Storage Tank 久保 高宏(Takahiro Kubo) 大森 章夫(Akio Ohmori) 谷川 治(Osamu Tanigawa) |
要旨 : 液化天然ガス (LNG) タンクの大容量化にともない,地上式タンクの内槽に使用される 9%Ni 鋼板は厚肉化の傾向にある。川崎製鉄では低 Si-Nb 添加成分系による厚肉高靭性 9%Ni 鋼板を開発した。工場試作した 50 mm 厚鋼板およびその溶接継手は,JIS 要求値を満たすとともに高い靭性を有することが確認できた。また,開発した鋼板を LNG タンクに適用した場合の安全性を破壊力学に基づいて評価した。その結果,鋼板および溶接継手は脆性破壊発生を阻止するために必要な特性と,万一破壊しても大規模な破壊に至る前にき裂を停止できる特性を有しており,LNG タンク用鋼材として極めて安全性の高い材料であることが明らかとなった。 |
Synopsis : A 50 mm thick 9% Ni steel plate of low Si and Nb-added type for an LNG storage tank with a capacity of 200 000 kl has been manufactured. Reduction in Si content and a small addition of Nb significantly improved HAZ toughness without a fall in strength. Furthermore, the applicability of the developed steel plate to actual tanks was evaluated. The developed steel plate and its welded joints, which were made of Ni-based weld materials, exhibited excellent strength and toughness. The flaw assessment proved that the developed steel plate and its welded joints have sufficient resistance to brittle fracture initiation and propagation. |
本文(PDF: 7P/294kb) |