■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol.29 (1997) No.3
■■■■■■■■■■■■■■■■■■■

方向性電磁鋼板の二次再結晶機構に関する一考察
A Mechanism of the Secondary Recrystallization in Grain Oriented Electrical Steel

早川 康之(Yasuyuki Hayakawa)
要旨 :
方向性電磁鋼板の二次再結晶におけるゴス組織発達の機構についての新仮説を高エネルギー粒界の物理的性質に基づいて提示した。一次再結晶集合組織の解析から、ゴス方位粒が高エネルギー粒界を最も多く持つことが示された。高エネルギー粒界は易動度が高く粒界拡散が速い。そのため仕上焼鈍中に、高エネルギー粒界上の析出物は速く粗大化し、先にピンニングがはずれて粒界は可動となる。よって高エネルギー粒界の頻度が最大のゴス粒が二次再結晶する。仮説を検証するために、粒成長シミュレーションと 粒成長時における粒界性格分布の変化の調査を行なった。結果はともにモデルで使用した仮定を支持するものであった。
Synopsis :
A mechanism of Goss texture development during the secondary recrystallization in grain oriented electrical steel is proposed based on the physical properties of the high-energy boundaries. From the analysis of the primary recrystallized texture, the frequency of the high-energy boundaries is proved to be the highest around the Goss grain. The high-energy boundary has more structural defects, which are linked to a high mobility and a high grain boundary diffusion rate. Quicker coarsening of precipitates enables high-energy boundaries to move earlier than other boundaries during final annealing. Thus, the Goss grain has a growth advantage of having the highest number of mobile boundaries during the progress of final annealing. In order to verify the proposed model of secondary recrystallization, Monte-Carlo simulation and the investigation of the grain boundary character distribution were performed, and both simulated and experimental results supported the assumption which is used in this model.
本文(PDF: 6P/367kb)




(c)JFE Steel Corporation, 2003