■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol.29 (1997) No.2
■■■■■■■■■■■■■■■■■■■

ラインパイプ用マルテンサイト系ステンレス継目無鋼管の開発
Development of Martensitic Stainless Steel Seamless Pipe for Linepipe Application

宮田 由紀夫(Yukio Miyata) 木村 光男(Mitsuo Kimura) 村瀬 文夫(Fumio Murase)
要旨 :
ラインパイプ用マルテンサイト系ステンレス継目無鋼管として,CO2 環境用 0.01C-11Cr-1.5Ni-0.5Cu-0.01N 系鋼管,および CO2 1 微量 H2S 環境用 0.01C-12Cr-5Ni-2Mo-0.01N 系鋼管を開発した。両鋼管は X80 級の強度,および溶接部の 240℃ のシャルピー吸収エネルギーが溶接ままで 100 J 以上の低温靱性を有しており,かつ,予熱および PWHT なしで割れが発生しない優れた溶接性を有している。また,CO2 環境用 11Cr 鋼管は 0.2C-13Cr 鋼より優れた耐 CO2 腐食性,CO2 1 微量 H2S 環境用 12Cr 鋼管は 10%NaCl 水溶液,pH 4.0,0.002 MPa H2S において耐 SSC 性を示す。本鋼管は腐食抑制剤を用いた防食や二相ステンレス鋼管などの高価な耐食材料を使用している従来のフローラインの代替材料に適している。
Synopsis :
Two types of martensitic stainless steel seamless pipes have been developed for linepipe applications. One is 0.01C-11Cr-1.5Ni-0.5Cu-0.01N steel pipe for CO2 environment, and the other is 0.01C-12Cr-5Ni-2Mo-0.01N steel pipe for CO2 and slight H2S environment. Both pipes are suitable for welding without preheating. They give X80 grade strength and good low temperature toughness of welds without PWHT. The former pipe gives better resistance to CO2 corrosion than the 13Cr martensitic stainless steel for OCTG. The latter pipe gives good SSC resistance in 10% NaCl solution with H2S partial pressure of 0.002MPa and pH value of 4.0. These steel pipes have a great economical benefit and are expected to substitute conventional flowline pipes using carbon steel with inhibitor injection or costly corrosion resistant materials, such as, duplex stainless steel.
本文(PDF: 7P/298kb)




(c)JFE Steel Corporation, 2003