■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol.29 (1997) No.1
■■■■■■■■■■■■■■■■■■■

配合炭流動度およびコークス収縮量予測モデル−コークス炉における劣質炭多量配合操業−
Prediction of Blended Coal Fluidity and Lateral Contraction of Coal in Coke Ovens -Technology for Increasing Charging Ratio of Low Quality Coal in Cokemaking -

松井 貴(Takashi Matsui) 井川 勝利(Katsutoshi Igawa) 反町 健一 (Ken-ichi Sorimachi)
要旨 :
コークス炉でのコークス押出し抵抗を低減するために,配合炭流動度推定モデルおよびコークス収縮量推定モデルを開発した。流動度推定モデルは,溶融状態を溶融した石炭に未溶融石炭とコークスが混在する懸濁液として取り扱い,懸濁液の粘度を溶媒粘度と固相比率から求めることにより推定精度を向上させた。クリアランス推定モデルは,乾留時の収縮力と膨張圧のバランスに基づき,収縮力が膨張圧を上回った時点でクリアランスの生成が開始するものとして取り扱い,収縮力はコークスの粘弾性を考慮し,膨張圧は溶融層におけるガスの発生および通気性を考慮してそれぞれ計算した。これらモデルの配合設計システムへの導入は,コークス押出し不良の減少およびコークス強度管理精度の向上による劣質炭使用量の増加を可能とした。
Synopsis :
New models for estimating the maximum fluidity (MF) of blended coal and the clearance between the coke oven wall and coke cake were developed to reduce hard pushing rate in coke ovens. In the MF model, heated coal during carbonization is regarded as a suspension composed of melted coal, unmelted coal and solidified coke. The viscosity of the suspension was evaluated by Moriユs equation, which included the viscosity of the solvent and volume fractions of solid. The clearance model is based on the balance between the contraction force and coking pressure. A clearance begins to appear when the contraction force exceeds the coking pressure in this model. The contraction force is calculated in consideration of the visco-elastic behavior of the thermal shrinkage of coke. The coking pressure is calculated from the generation and dispersion of gas in the melting layer. Use of these models in the coal blending design system has successfully reduced the hard pushing rate. Moreover, precise control of coke strength with the new system has made it possible to increase the use of low-grade coal.
本文(PDF: 5P/238kb)




(c)JFE Steel Corporation, 2003