■■■■■■■■■■■■■■■■■■■ 川崎製鉄技報 KAWASAKI STEEL GIHO Vol.28 (1996) No.1 ■■■■■■■■■■■■■■■■■■■ |
高品質線棒素材の精錬・鋳造技術の進歩 Improvement of Refining and Casting Technique for High Grade Wire and Bar Products 藤村 俊生(Toshio Fujimura) 櫛田 宏一(Koichi Kushida) 本郷 晴(Haruo Hongo) |
要旨 : 高級線棒用製品向けブルーム,ビレットに要求される特性は極めて厳しく,高度で安定した製造技術が必要である。水島製鉄所においては1968年より形鋼,シームレス,線棒用素材の連鋳化を積極的に推進して素材の均質化と安定化をはかってきた。また機械構造用鋼,硬鋼線,タイヤコード素材の清浄化や内部品質改善を目的として大断面サイズモールドを導入するともに無手入れ圧延技術を確立し,1986年には製鋼〜圧延連続同期操業化を図り,直行率90%を達成した。同時に,精錬工程に対しても技術革新を進め大量溶銑予備処理,上底吹転炉とRH脱ガスをベースにした高清浄鋼製造技術を確立した。さらに連続鋳造における連続鍛圧技術を確立することにより長年の深刻な課題であったブルームの中心編析に起因する主要な問題を解決し安定した高級線棒用素材の製造体制を確立した。 |
Synopsis : Stable and advanced production techniques are required to meet the severe prerequisite for blooms and billets rolled into high grade wire and bar products. To improve steel product quality, application of CC process for materials of shapes, seamless pipe, wire and bar products has been promoted since 1968 at Mizushima Works. By taking the advantages of the surface defects free casting techniques and large section blooms and as the result of Synchronized operations of the steelmaking shop and billet mill, in 1986, 90% of blooms for those products, including machine structure, high carbon wire and steel tire code, was hot charged. At the same time, a clean steelmaking process was developed on the basis of mass hot-metal pretreatment, top and bottom bowing converters and enhanced RH degassing. With the subsequent development of continuous forging process during casting, which eliminates central segregation problems, a reliable and stable process for high grade wire and bar products was established. |
本文(PDF: 7P/296kb) |