■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol.24 (1992) No.1
■■■■■■■■■■■■■■■■■■■

アモルファス磁性合金を利用した変位センサ「リニアエース」の開発
Displacement Sensors Using Amorphous Magnetic Alloy,“LINEAR ACE”

矢部  直(Tadashi Yabe) 水野 俊行(Toshiyuki Mizuno) 大野 昌章(Masaaki Ohno) 秋山 武司(Takeshi Akiyama)
要旨 :
川鉄テクノリサーチ(株)ではアモルファス磁性合金を使用した高性能の変位センサー「リニアエース」を開発した。リニアエースはCo基のアモルファス磁性合金ワイヤを磁心に用い,インダクタンスの変化を電気量に変換するのにマルチバイブレータ回路を採用して小型化,高速応答化を図った新しいセンサで,1987年より販売を開始した。その後,耐熱性を付加して180℃の使用を可能としたもの,超軽量のものとして磁心重量0.1gとほぼ反力を無視できるもの,またコイル電流2mAの低消費電力型などのものが開発され,好評を得ている。
Synopsis :
Kawasaki Steel Techno Research Corp, has developed and marketed a displacement sensor, “LINEAR ACE”, that uses magnetic core of Co-based amorphous alloy wire. LINEAR ACE is a new type sensor, using a selfexcitation circuit (multi-vibrator), that enables a high-speed response and a very small outline. The authors improved the operating temperature to 180℃ and the sensor head size, in addition to reducing the magnetic core weight only to 0.1g, allowing measurements to be achieved without impressing any load on the target measurement object, and allowing the coil current to be reduced to 2 mA. LINEAR ACE has received favorable responses from users.
本文(PDF: 6P/330kb)




(c)JFE Steel Corporation, 2003