■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol. 23(1991) No.4
■■■■■■■■■■■■■■■■■■■

潤滑鋼板「リバージンク(R)FS」の開発
Development of Self-lubricant Steel Sheet "RIVER ZINC(R) FS"

鈴木 幸子(Sachiko Suzuki) 戸塚 信夫(Nobuo Totuka) 栗栖 孝雄(Takao Kurisu) 市田 敏郎(Toshio Ichida) 毛利 泰三(Taizo Mouri)
要旨 :
プレス加工工程での塗油・脱脂作業を省略できる潤滑鋼板「リバージンクFS」を開発した。これは,電気亜鉛めっき鋼板をベースにクロメートと特殊樹脂処理を施した機能性表面処理鋼板である。著者らは,実プレスで発生するパウダリングが絞り速度500mm/Sの連続円筒絞り試験で,実験室的に再現できることを見出した。本法に基づき検討した結果,酢酸ビニルにポリオレフィンワックスを添加した樹脂を付着量0.5〜1.4g/m2塗布し,到達板温度120〜180℃で焼き付けることで,耐パウダリング性と深絞り性が両立することがわかった。リバージンクFSは,プレス成形性のみならず,耐食性,耐指紋性および溶接性に優れ,家電メーカーを中心に需要が拡大しつつある。
Synopsis :
Self-lubricant steel sheet "RIVER ZINC(R)FS" which can eliminate oiling and degrease in forming process has been developed. This functional pre-coated steel sheet is constructed with an electro-galvanized sheet, chromate under-coat and resin top-coat containing organic lubricant. the authors found out that the powdering, which lowers the formability in practical press forming, can be reproduced by the experimental continuous cup-drawing test with high drawing speed of 500mm/s. The reproduced test has lead to the following results; The anti-powdering and deep drawability resistance are achieved by coating vinyl-acetate added polyolefin wax at coating weight of 0.4 to 1.4g/m2 and baking at 120 to 180℃. The self-lubricant steel sheet developed has excellent press formability in addition to good corrosion resistance, anti-fingerprint and good spot weldability. The use of self-lubricant steel sheet "RIVER ZINC FS", has been increasing mainly in the area of electric appliances.
本文(PDF: 6P/308kb)




(c)JFE Steel Corporation, 2003