■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol. 23(1991) No.3
■■■■■■■■■■■■■■■■■■■

電磁鋼板精整ラインの自動搬送エキスパートシステム
Application of Expert System to Real Time Coil Transportation Control in Electrical Steel Finishing Line

穴吹 善範(Yoshinori Anabuki) 尾脇 林太郎(Rintaro Owaki) 崎山 英昭(Hideaki Sakiyama) 中路  茂(Shigeru Nakazi) 片江 隆行(Takayuki Katae)
要旨 :
エキスパートシステムを電磁鋼板精整ラインの搬送制御に適用し,搬送設備の完全自動運転を実現した。本搬送制御は,24台の搬送キャリアを用いてスリットコイルの最適な搬送計画をリアルタイムで立案し実行する。リアルタイム性を確保するために,搬送制御ルールを機能ごとのルール郡に分割し,必要なルール郡のみが動作するようにして応答性を3秒以内を達成した。エキスパートシステムを搬送制御に適用した結果,複雑な運転方案を容易にシステム化できるとともに,ソフトウエア開発工数が従来の半分に削減された。1990年3月に稼働を開始して以来,本システムは,精整ラインの自動化に大きく寄与している。
Synopsis :
An ES (expert system)-assisted control system has fully automated the operation of transportation facilities for the electrical steel finishing line in the Mizushima Works. The system forms optimum schedules for transferring of slit coils and executes them all on the on-line basis, placing the 24 monorail-type coil carriers under its control. In order to obtain a necessary response for real-time use, control rules are divided into groups according to their functions, and only designated rule groups are made to run at a time, securing a response of less than 3 seconds. The adoption of ES successfully enabled the system to embody highly sophisticated operations in the line, with the man-months of software development reduced to one half those in conventional cases as well. The system has been smoothly working, and contributing greatly to the highly-efficient operation of the line since its commissioning in March 1990.
※PDFで全文公開するため、著作権者の許可を申請中です。全文入手をご希望なさる場合は、川鉄製鉄技報を所蔵している図書館などに複写をご依頼ください。




(c)JFE Steel Corporation, 2003