■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol. 22(1990) No.1
■■■■■■■■■■■■■■■■■■■

新しい低騒音低振動鋼管杭(ドリル杭)工法の開発
Development of Low Noise and Low Vibration Steel Pipe Pile (Drill Pile) Method

館野 次郎(Jiro Tateno) 橋本 正治(Masaharu Hashimoto) 西澤 信二(Shinji Nishizawa) 佐藤 清治(Seiji Sato) 豊原 陽登志(Hitoshi Toyohara) 志賀 厚(Atushi Shiga)
要旨 :
当社が開発した回転貫入鋼管杭工法は,低騒音,低振動,かつ排土のない低公害型を指向した新しい工法である。杭体は開端の先端部内外周面に丸棒のスパイラルリブを取り付けた構造で,杭外周土を大きく攪乱することなく貫入でき,かつ支持層において杭先端の自然閉塞を完了させてそのまま支持杭とすることができるため、在来工法に比べ経済性に優れた工法である。実杭の貫入比較試験を実施し,スパイラルリブの効果の検証と貫入した杭の先端部閉塞状況の観察などを行い,貫入機構の考察を行った。さらに,施工管理について貫入中のデータから杭先端土質性状を推定し,支持層への根入れ長を管理する方法を調査した。支持力特性については,載荷試験結果から,先端根固めしないで十分な支持力が得られることがわかった。また,杭内周面スパイラルリブの取り付けは,自動溶接法を開発し総合技術として実用化の見通しを得た。
Synopsis :
Kawasaki Steel has developed an innovative rotary-penetration steel pipe pile method, which uses an open end with a helical projection composed of 13-mm-diameter round rods arranged on both the outer and inner circumferences of the pile at a length part less than ten times the diameter of the pile. The pile head is held with a rotary device, and twisted into the ground using a rotational force until it penetrates into the bearing stratum. Little disturbed soil, while the pile is penetrating and strong blockade soil at the tip of the pile realize economical pile method. Vertical load test results indicate adequate bearing capacity can be attained. Low vibration and low noise during the execution of the work, better workability. Clean execution of the work without discharging soil and better cost efficiency can be obtained. Besides, this method can provide an economical means of forming an automatic and mechanical fixty of the inner spiral rib. In conclusion, we are convinced of the feasibility of this pile method.
本文(PDF: 7P/355kb)




(c)JFE Steel Corporation, 2003