■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol.21 (1989) No.3
■■■■■■■■■■■■■■■■■■■

サイジングプレスによる大幅圧下時のスラブの変形
Deformation of Slab under Heavy Reduction of Width by Sizing Press

比良 隆明(Takaaki Hira) 磯辺 邦夫(Kunio Isobe) 阿部 英夫(Hideo Abe) 二階堂 英幸(Hideyuki Nikaido) 藤津  武(Takeshi Fujitsu) 頭山  奨(Susumu Zuyama)
要旨 :
熱間圧延用スラブ幅を鋳造時に集約し,連鋳と熱間圧延工程の同期化,連続化を目的に,水島製鉄所において,鞄立製作所とともに,スラブの大幅圧下が可能な連続プレス式サイジング設備を世界で初めて開発した。当設備は,1987年より稼働を開始し,現在まで順調に操業を続け当初の目標を達成した。本報告ではプレス特有のスラブの変形挙動について述べた。スラブの定常部に関しては,プレス後の粗圧延における幅戻り量を予測するモデルを開発した。また上界法を用いプレス金型とスラブ先後端との接触位置関係とプレス後のスラブ平面形状との関係を明らかにした。さらに粗圧延後のシートバークロップロスを最小にするプレス予成形条件を検討した。
Synopsis :
Kawasaki Steel Corp. and Hitachi Ltd. have first developed the slab sizing press in the world. The sizing press enables us to meet a synchronized operation between continuous casting and hot rolling processes. The equipment has been put into practical operation since 1987 at Mizushima Works. The deformation of slabs by sizing was investigated. The prediction model of width spread of slabs rolled by the first roughing stand after sizing press was developed. Deformation of the slab at leading and tailing ends was analyzed by the upper bound technique to obtain the relationship between the plan view of slab ends and the geometrical conditions. The study was also extended to the effect of press conditions at leading and tailing ends on sheet bar crops after roughing rolling. As result, optimum press condition to minimize a crop loss has been clarified.
本文(PDF: 7P/333kb)




(c)JFE Steel Corporation, 2003