■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol.20 (1988) No.1
■■■■■■■■■■■■■■■■■■■

二相ステンレス継目無鋼管の製造とその品質
Manufacturing Technology of Duplex Stainless Steel Seamless Pipes and Its Characteristics

玉置 克臣(Katsuomi Tamaki) 山本 健一(Kenichi Yamamoto) 高田  庸(Isao Takada) 片桐 忠夫(Tadao Katagiri) 岡    弘(Hiroshi Oka) 唐鎌 勝則(Katsunori Karakama)
要旨 :
Cl-CO2環境下のラインパイプ用鋼として注目されている22%Cr系二相ステンレス継目無鋼管について,材質面で低S化とCa添加による高温時の固溶S量の減少,圧延面で適正なパススケジュールの採用を行うことによりマンネスマン圧延方法による製造技術を確立した。適性γ/α比と高Pitting index(例えばCr+3Mo+16N≧33.0)を両立させうる化学組成および最適固溶化熱処理温度も検討した。予備検討結果をもとに製造した継目無鋼管(KLC-22CR)はCl-CO2環境用ラインパイプとして十分な機械的性質および耐食性を備えていること,また円周溶接継手熱影響部についても母材と同等の耐食性を有していることを確認した。
Synopsis :
Duplex stainless steel has been attracting attention as pipelines for the natural gas which contains a large amount of CO2. Kawasaki Steel has established a manufacturing technique of duplex seamless pipes(KLC-22CR) by the Mannesmann rolling process. The basic technique is the application of appropriate' pass schedule and improvement in the hot workability which has been achieved by the reduction of S and addition of Ca. Optimum chemical composition and annealing temperature have been also studied for obtaining the suitable γ/α ratio and high pitting indes(ex.: Cr+3Mo+16N≧33.0). KLC-22CR produced on the basis of pre-production studies showed superior mechanical and corrosion properties as the linepipe for CO2 services. Furthermore, the girth weld HAZ in the as-welded condition had almost the same corrosion properties as the pipe body.
本文(PDF: 6P/280kb)




(c)JFE Steel Corporation, 2003