■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol.18 (1986) No.2
■■■■■■■■■■■■■■■■■■■

レーザを用いた鋼板の表面粗度および光沢度の測定
One-line Measurement of Surface Roughness and Glossiness by Using Laser Beam

浅野 有一郎(Yuichiro Asano) 塩住 基仁(Motoji Shiozumi) 虎尾  彰(Akira Torao)  柳本 隆之(Takayuki Yanagimoto)  栗田 邦夫(Kunio Kurita) 八角 忠明(Tadaaki Yasumi)
要旨 :
冷延鋼板の表面粗度と光散乱特性の関係についてBeckmannの理論に従い数値計算による検討を行った。これにより正反射強度から粗度パラメータRa(平均粗さ), T(自己相関距離)を求める場合の最適条件を明らかにした。この結果に基づきHe-Neレーザを用いたオンライン粗度計を開発し, RaおよびTの測定精度として各各±10%,±20%を得た。またステンレス鋼板表面の視感光沢と粗度パラメータおよび光散乱特性の関係を明らかにし,判別関数を用いる手法によって視感光沢とほぼ一致する光沢判定技術を考案した。これらの知見とオンライン粗度計の原理を基に,Arレーザを用いたオンライン光沢計を開発し,これまでの目視による検査を自動化した。
Synopsis :
The relation between surface roughness and scattered light intensity was analysed with cold-rolled steel sheets, and the appropriate condition for surface roughness measurement was selected in terms of the incident angle and wavelength of a projected light beam. These results led to the development of an on-line roughness measurement system using He-Ne laser light. The averaged roughness and the correlation distance of a surface profile were obtained with accuracy of ±10% and ±20%, respectively. The relation between the sensory glossiness of stainless steel sheets and roughness parameters was also analysed and the significant correlation was found between them. According to the above results, the sensory glossiness can be measured by detecting scattered light intensities in the similar way as in the measurement of roughness parameters. On-line glossiness measurement system using Ar laser light was also developed for automatic inspection in the stainless steel rolling line.
本文(PDF: 8P/386kb)




(c)JFE Steel Corporation, 2003