■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol.17 (1985) No.4
■■■■■■■■■■■■■■■■■■■

高品質Cr-Mo鋼用狭開先サブマージアーク溶接材料の開発
Development of High-Quality Narrow Gap Submerged Arc Welding Consumables for Cr-Mo Steel

徳久 正昭(Masaaki Tokuhisa) 平井 征夫(Yukio Hirai) 西山  昇(Noboru Nishiyama) 山下  至(Itaru Yamashita) 西尾  要(Kaname Nishio) 中辻 勝明(Katsuaki Nakatsuji)
要旨 :
Cr-Mo鋼サブマージアーク溶接金属のじん性改善に関する冶金的検討を行い,ベイナイトラス幅の微細化と炭化物の均質な分散析出によって高じん性な溶接金属が得られることを明らかにした。この知見に基づき,2? Cr-1 Moおよび3 Cr-1 Mo鋼用の高じん性なHigh C-V系溶接材料と高強度なHigh C-V-Ti系溶接材料を開発した。開発した高じん性2? Cr-1 Mo鋼用狭開先サブマージアーク溶接材料−フラックスKB120CM,ワイヤKWT210−を用いてモックアップ試験を実施した結果,高品質な溶接部が得られ,かつコスト低減を図りうることを確認した。
Synopsis :
In a narrow gap arc welding process with a one-run-per-layer technique, the toughness of weld metal greatly depends on that of asdendrite structure. The increase in carbon content and V-addition have beneficial effects on improving the as-dendrite structure toughness by refining the bainitic lath sub-structure and increasing fine carbo-nitrides witch have precipitated uniformly within the γ-grains after PWHT. Two types of narrow gap SAW consumables, i.e., the high C-V system for excellent-toughness Cr-Mo steels and high C-V-Ti system for enhanced-strength Cr-Mo steels have been developed on the basis of the above-mentioned metallurgical findings. The realization of a narrow-gap tandem SAW process was confirmed by a production scale mock-up test using the newly developed consumables.
本文(PDF: 9P/405kb)




(c)JFE Steel Corporation, 2003