■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol.16 (1984) No.1
■■■■■■■■■■■■■■■■■■■

海洋開発用高張力強靭鍛鋼の製造
Manufacture of High Strength and Toughness Steel Forging for Offshore Development Projects

朝生 一夫(Kazuo Aso) 狩野 俊之(Toshiyuki Kano) 和中 宏樹(Hiroshige Wanaka) 内田  清(Kiyoshi Uchida) 狩野 征明(Seimei Karino)
要旨 :
海洋開発向けに靭性の優れた高張力強靭鍛鋼の製造技術を開発した。その特徴は (1)先ず製品に要求される靭性の優先方向に合せた鍛錬比を設定,および (2)鍛錬直後に加速冷却処理を採用,(3)より細粒を得るためのある種の繰り返し焼入れ,を実施することにあり,その結果,優れた靭性を有する耐力80〜90 kgf/mm3級の鍛鋼を製造できることが明らかとなった。ここでは主として靭性におよぼす上記条件の影響および200 mm厚さの実体規模の確性試験結果について述べた。
Synopsis :
A manufacturing procedure to obtain improved toughness has been developed, in producing high-strength, high-toughness steel forgings for offshore services. The points are; (1)improved forging design adjusted to required directional preference of impact toughness, (2)adoption of accelerated cooling just after forgings, and (3)applying a type of multiple-quenching to achieve finer grain. Based on these results, excellent impact properties and sufficient directional preference were obtained as expected in 200 mm thick fullsize model forgings of 80 kgf/mm2 and 90 kgf/mm2 yield strength. The influence of the above three points on toughness, and mechanical properties of model forgings are described in this paper.
本文(PDF: 9P/320kb)




(c)JFE Steel Corporation, 2003