■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol.15 (1983) No.2
■■■■■■■■■■■■■■■■■■■

上底吹き転炉上吹きランスからの生石灰基フラックス・インジェクション
Injection of Lime Powder through Top Lance of Combined-Blowing Converter

田岡 啓造(Keizo Taoka) 今井 卓雄(Takuo Imai) 久我 正昭(Masaaki Kuga) 橘  林三(Rinso Tachibana) 大西 正之(Masayuki Onishi) 永井  潤(Jun Nagai)
要旨 :
上吹き転炉は,底吹きガスの攪拌効果により,スラグ中(T.Fe)が低く,鉄歩留が良好な反面,中・高炭素濃度域の脱燐に難点があった。そこで,上底吹き転炉の脱燐能改善を目的に,上吹きランスから生石灰粉を吹込む実験を行った。生石灰粉の上吹きにより,脱燐能の大きいカルシウム・フェライトが生成するため,上底吹き転炉の中・高炭域の脱燐能は改善される。また,生石灰粉の吹込み時期の調整により,(T.Fe)をコントロールすることが可能である。
Synopsis :
Combined-blowing converter shows salient characteristics of better mixing performance in the vessel compared with that of LD, and this leads to a higher metal yield due to less content of (T.Fe) in slag. Dephosphorization rate, however, in earlier stage of development, decreased in a higher carbon range. Therefore, experimental works have been performed to improve the dephosphorization behavior in combined-blowing practice by injecting CaO powder through the top lance. An improvement on dephosphorization observed even in a higher carbon range may be attributed to calcium ferrite formed at the impinging region and reacting directly with phosphorus in hot metal. (T.Fe) in slag can be controlled by changing he timing of lime injection through the top lance.
本文(PDF: 6P/232kb)




(c)JFE Steel Corporation, 2003