■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol.15 (1983) No.2
■■■■■■■■■■■■■■■■■■■

上底吹き転炉(K-BOP)の操業技術の確立
Development of Top and Bottom Blown Converter (K-BOP)

永井  潤(Jun Nagai) 山本 武美(Takemi Yamamoto) 武  英雄(Hideo Take) 大石  泉(Izumi Oishi) 大森  尚(Hisashi Ohmori) 飯田 義治(Yoshiharu Iida)
要旨 :
上吹き転炉に底吹き転炉の利点を取り入れた上底吹き転炉(K-BOP)を開発した。K-BOPは,吹錬酸素のおよそ30%を底吹きし,攪拌力を底吹き転炉に近づけるとともに,微粉石灰をインジェクションできるようにした。水島製鉄所の第二製鋼工場250t転炉で実験を行い,多種,多様な鋼種に適した吹錬技術を開発し,上吹き転炉に対する優位性を立証した。特に,高温出鋼材での迅速出鋼技術,低シリコン銑の吹錬技術の確立により,石灰原単位,歩留などの経済的効果のみならず,プロセスの安定性,生産性が向上し,高脱ガス処理比,および高連鋳比操業に対応した製鋼炉として優れていることがわかった。また,耐火物成績の向上,排ガス回収についても述べた。
Synopsis :
A combined blowing process, named K-BOP, has been developed at No.2 steelmaking shop, Mizushima Works, Kawasaki Steel Corp., by adding the facility of the bottom gas blowing to a 250t oxygen top blown converter to increase the stirring intensity of moltem steel. To enhance the stirring of bath as intensive as that for Q-BOP, about 30% of total blowing oxygen is injected with powdered lime from bottom tuyeres, consisted of double concentric pipe. Precise and stable end-point control ([P] control, inclusive) at high taping temperature has completed the "Quick and Direct Tapping Technique" so that improvement in steel yield, and consumption saving of refractory and lime have been achieved. K-BOP has exhibited not only economical merit but also high productivity and reliability, and is suited to integrated steel plant with high application ratio of vacuum degassing and continuous casting.
本文(PDF: 7P/271kb)




(c)JFE Steel Corporation, 2003