■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol.14 (1982) No.3
■■■■■■■■■■■■■■■■■■■

9%Ni鋼の純アルゴンシールド共金MIG溶接
Matching Ferritic Filler MIG Welding of 9% Ni Steel

阿草 一男(Kazuo Agusa) 古生 正昭(Masaaki Kosho) 西山  昇(Noboru Nishiyama) 鎌田 晃郎(Akio Kamada) 中野 善文(Yoshifumi Nakano)
要旨 :
希土類元素添加ワイヤによる純アルゴンシールドMIGアークの安定化技術(既報)を9%Ni鋼の共金溶接に適用し,溶接金属の耐温度割れ性,機械的性質ならびに破壊じん性について調べた結果,共金溶接の実用化が可能なことが明かになった。得られた成果を要約すると次のとおりである。(1)共金溶接金属の耐温度割れ性は,高Ni系溶接金属よりすぐれ,クレータ部にも割れは発生しない。(2) 全溶着金属および溶接継手の引張特性は,鋼板のそれに匹敵することから,設計許容応力の引上げが可能である。(3) 共金溶接金属の低温じん性は,純アルゴンシールドに基づく低酸素化と低シリコンワイヤの使用により,高Ni系溶接金属と同等のすぐれた値を示す。(4) 共金溶接部は,すぐれた破壊じん性を有する。
Synopsis :
A technique for stabilizing pure argon shieded MIG arcs using rare earths-bearing electrode wires has been applied to the metching ferritic filler welding of 9%Ni steel. Investigations have been made on the hot crack susceptibility, mechanical properties and fracture toughness of weld metals. The results of the investtigations summarized below have proved the practicability of the matching ferritic filler welding. (1) Hot crack resistivity of ferritic weld metals is far better than that of high-Ni-based weld metals, with no crack occurring even in weld craters. (2) Tensile properties of all-deposited metals and welded joints are equal to those of the base plates, with a rise in the allowable design stress value. (3) Farritic weld metals obtained with pure argon shielded MIG arcs have excellent low-temperature toughness based on the reduction in silicon and oxygen contents. (4) Matchinig ferritic welds obtained with pure argon shieded MIG arcs have excellent fracture toughness.
本文(PDF: 12P/393kb)




(c)JFE Steel Corporation, 2003