■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol.12 (1980) No.1
■■■■■■■■■■■■■■■■■■■

大型鋼塊による原子炉圧力容器用SA533 Type B Class 1 極厚鋼板の製造
Manufacture of SA533 Type B Class 1 Extra-heavy Steel Plate for Nuclear Power Plant Components Using a Large Ingot

楠原 祐司 (Yuji Kusuhara) 腰塚 典明 (Noriaki Koshizuka) 関根 稔弘 (Toshihiro Sekine) 榎並 禎一 (Teiichi Enami) 田中 康浩 (Michihiro Tanaka) 小林 英司 (Eiji Kobayashi) 斎藤  達 (Toru Saito)
要旨 :
原子炉圧力容器用鋼材とくに炉芯領域で使用される材料は,とくに高い靭性が要求される。これら靭性の要求を満たすための基本方針として,脆化元素の低減および組織の微細化をあげ,C,Al,N 含有量の適正化,微量不純物元素の低減などが有効であることを示した。さらに,LD-LRF プロセスの大型鋼塊を用い,これらの方針をもとに決定した目標成分で,板厚163〜250mmの極厚鋼材を製作した。これら鋼板は,内部健全性,均質性にすぐれ,強度,衝撃靭性,落重特性,破壊靭性,疲労特性いずれも,原子炉圧力容器として十分使用に耐える性能を有していることがわかった。
Synopsis :
An extremely high toughness is required of steels for nuclear power plant components, especially for the irradiated region of reactor vessels. As basic concept of measures to satisfy the above toughness requirement, this paper discusses reduction of brittleness-causing elements and micronization of steel structure, and points out that optimization of C, Al and N contents and reduction of fine inclusion elements are effective. Actually, an extra-heavy (163〜250mm thick) steel plate having aimed composition determined based on the above concept was manufactured using a large ingot made by LD-LRF process. The steel plate proved excellent in internal soundness and uniformity, with its strength, impact toughness, drop-weight test values, fracture toughness, and fatigue properties fully serviceable as material for reactor vessels.
本文(PDF: 11P/371kb)




(c)JFE Steel Corporation, 2003