■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol.11 (1979) No.4
■■■■■■■■■■■■■■■■■■■

太径異形棒鋼リバーコン D51の低温特性
Mechanical Properties of Large Diameter Deformed Bar RIVERCON D51 at Extremely Low Temperatures

高橋 千代丸(Chiyomaru Takahashi) 下野 俊男(Toshio Shimono)
要旨 :
LNG 貯蔵タンクに使用される太径異形棒鋼 D51を対象とし,実物大の低温引張試験と低温低サイクル疲労試験を行って強度特性を調査した。供試材には,JIS G 3112 SD35の仕様で製造された一般工程品であるリバーコン D51を用い,常温〜−160℃の範囲で実験を行った結果,以下のように十分実用に供しうるとの結論が得られた。(1) 静的引張試験における D51の母材とスクイズジョイント継手の降伏点は,−100℃において常温の約1.4倍,−160℃で1.7倍を有する。(2) 疲労試験における−100℃の時間強度は,5.84×10**3回で59.8kgf/mm2, 18.7×10**3回で50kgf/mm2を示し,優れた疲労特性を有する。
Synopsis :
Mechanical properties of large diameter deformed bars for the use of LNG storage tanks at extremely low temperatures were investigated by static tensile tests and low-cycle fatigue tests. Actual-size specimens D51 with the specification of JISG3112 SD35 were used for the tests performed at the temperature of R.T. to -160℃. As a result, the following conclusions were oftained: (1) The static tensile tests revealed that the base metal and its Squeeze Joint have the yield point 1.4 times at the test temperature of -100℃ and 1.7 times at -160℃ as large as the strength at R.T. (2) The fatigue tests showed that the base metal at -100℃ has the fatigue strength of 59.8kgf/mm**2 at 5.84×10**3 cycles and of 50kgf/mm**2 at 18.7×10**3 cycles. These strengths are considered excellent.
本文(PDF: 6P/183kb)




(c)JFE Steel Corporation, 2003