■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol.6 (1974) No.2
■■■■■■■■■■■■■■■■■■■

極厚鋼板のプログラム試験法
Programmed Test Method for Heavy Plate

原  弘範(Hironori Hara) 吉村 茂彦(Shigehiko Yoshimura)
要旨 :
極厚鋼板の熱処理後の機械的性質を把握するための焼入れ方法として,小型試験片を用い,冷却条件を製品本体の冷却条件にシミュレートさせて行なってもよいということがASME Sec.Vに規定されている。そこで,極厚の2 1/4 Cr-1 Mo鋼(ASTM A387D)およびMn-Ni-Mo鋼(ASTM A533B)を用い,プログラム法で熱処理を行ない,従来の3T法での機械的性質との比較を行なった。その結果,本プログラム法は,十分従来の3T法での機械的性質と一致することがわかった。
Synopsis :
ASME Rules prescribe that a programmed test method may be applied to certify the mechanical properties of heavy plates. In this article, the programmed test method is applied for 2 1/4%Cr-1%Mo steel and Mn-Ni-Mo steel heavy plates, and these results are compared with those obtained by the conventional "3T test method". By the results of the experiments, it is concluded that the test method can be applied to the actual productions in place of the conventional "3T test method".
本文(PDF: 10P/389kb)




(c)JFE Steel Corporation, 2003