■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol.5 (1973) No.2
■■■■■■■■■■■■■■■■■■■

水島製鉄所熱延工場の概要
Outline of the 2300mm Hot Strip Mill at Mizushima Works

清水 勇夫(Isao Shimizu) 武田 利弌(Toshikazu Takeda) 梅本 純生(Sumio Umemoto)
要旨 :
本文は1970年1月より稼働中の水島製鉄所2300mmホットストリップミルの概要を述べたものである。この工場は,完成時年産450万tの規模で計画され,厚み1.2mm〜16.0mm,最大コイル重量45t,最大幅2200mmの熱延コイルを生産している。本工場の特徴は次の如くである。(1)加熱炉は,プッシャー型6帯式加熱炉でホットスキッドを採用している。(2)全仕上圧延機にワークロールベンディングとDDC型AGCを備え,良好な厚み精度,形状のストリップを生産している。(3)圧延材は,加熱炉からダウンコイラーまでon-line computerで制御されている。
Synopsis :
This report presents general features of the 2,300mm hot strip mill at Mizushima Works, which went on stream in January 1970. Planned for an annual capacity of 4,500,000 metric tons at the final stage, this plant produces hot rolled coils, from 1.2 to16.0mm in gage, up to 45 metric tons with a max. width of 2,200mm. The outstanding features of this plant are as follows: (1) Slab reheating furnaces are of 6-zone pusher type furnace with hot skids. (2) All finishing stands provide work roll bending and DDC type AGC to improve strip thickness and shape. (3) From furnace to down-coiler, rolling materials are controlled by on-line computers.
本文(PDF: 13P/447kb)




(c)JFE Steel Corporation, 2003