■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol.4 (1972) No.3
■■■■■■■■■■■■■■■■■■■

極厚調質80キロ高張力鋼
The Heavy Plate of Quenched and Tempered Steel with 80kg/mm2 Tensile Strength

船越 督己(Tokushi Funakoshi) 坪井 潤一郎(Junichiro Tsuboi) 安田  達(Tohoru Yasuda) 猪又 克郎(Katsuro Inomata) 青木 真一(Shinichi Aoki)
要旨 :
極厚調質高張力鋼板の用途は,圧力容器,ペンストック,産業機械,土木構造物などの多岐にわたり,とくに土木構造物では板厚50〜100mm極厚鋼板の需要の増加が予想される。このような状況に対処するため極厚調質高張力鋼板の製造方法について種々検討した結果,従来の鋼材よりも安定した製造工程により,低炭素当量で溶接性がよく,しかも全板厚にわたり均質で良好な靱性をもつ板厚100mmまでの鋼板の製造が可能になった。本報告では大阪南港連絡橋用に開発された80kg/mm2級極厚板の製造上の考え方と製造実績についてまとめた。
Synopsis :
Quenched and tempered high tensile strength steel plates with large thickness are now widely used for civil structures such as long span bridges, penstocks, industrial machines. Good weldability, high notch toughness and homogeneous mechanical properties in the thickness direction are required for these plates. This paper describes fundamental experiments, manufacturing process and mechanical properties of HT-80 heavy plates for NANKO Bridge, in Osaka.
本文(PDF: 14P/490kb)




(c)JFE Steel Corporation, 2003