■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol.4 (1970) No.1
■■■■■■■■■■■■■■■■■■■

千葉製鉄所極薄圧延機の概要
Outline of Double Cold Reduction Mill at Chiba Works

小林 昭雄(Akio Kobayashi) 君嶋 英彦(Hidehiko Kimishima) 塩田 将陽(Masaharu Shiota)
要旨:
本圧延機は油圧圧下方式による3スタンドタンデムミルであり,板厚0.08〜0.6mm,板幅457〜1,120mmの極薄ブリキ用鋼板の生産を目的に設置されたものであるが,このほか板厚0.5〜1.8mmの冷間圧延と板厚0.1〜1.0mmの調質圧延も可能である。最大コイル重量は21t,最大コイル外径は3134mmである。油圧圧下装置や自動板厚制御装置,自動伸び率制御装置,自動張力調節,ワークロールクラウン制御装置の採用などにより,製品制度および品質向上を図っている。圧延速度は極薄圧延および冷間圧延のときは,1,524m/min, 調質圧延のときは1,220m/minである。
Synopsis :
This three-stand tandem hydraulic mill, installed at Chiba Works in May 1971, is designed for the production of light weight tin plate with thickness of 0.08 to 0.6mm and width of 457 to 1,120mm. However, the mill is now producing cold-reduced strip with thickness of 0.5 to 1.8mm and skin passed strip with thickness of 0.1 to 1.0mm. Maximum coil weight is 21,000kg. Maximum coil diameter is 2,134mm. All stands are furnished with hydraulic reduction system, automatic gauge control, automatic elongation control, automatic tension regulator, and work roll crown control system in order to give the highest quality to the products. The rolling speed is 1,524m/min in case of light weight tin mill and cold-reduced products. Skinpass rolling is 1,220 m/min.
本文(PDF: 6P/190kb)




(c)JFE Steel Corporation, 2003