■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol.3 (1971) No.3
■■■■■■■■■■■■■■■■■■■

ホットストリップミルの計算機制御システムと運転実績
Computer Control System of a Hot Strip Mill and Operation Results

黒津 亮二(Ryoji Kurotsu) 豊坂 秀夫(Hideo Toyosaka) 伊藤  実(Minoru Ito) 片岡 健二(Kenji Kataoka) 峰松 隆嗣(Takashi Minematsu) 御厨  尚(Takashi Mikuriya)
要旨 :
川崎製鉄(株)千葉製鉄所80″ホットストリップミルの計算機制御システムの開発は,1964年に開始され,1970年3月完成した。本システムの機能は,加熱炉出側からコイラーまでのスラブトラッキング,ミルパーシング,粗圧延機および仕上圧延機の自動設定,捲取り温度制御およびデータロギングである。このうち仕上圧延機の自動設定は,最も重要な機能であり,これに必要な圧延荷重の予測計算方法の開発に努力が集中された。この結果,Simsの式にもとづく簡単で精度の良い方法が得られた。圧延荷重の予測精度はσで5%である。計算機設定で圧延されたロット1本目の板厚精度については,±50μ以内に95%の板が収まる結集が得られている。システムの効果としては,生産能率向上,歩止まり向上,省力化,操業の安定化などがあげられる。
Synopsis :
The development of a computer control system of 80" hot strip mill at Chiba Works began in 1964, and successfully completed in March, 1970. The function of this system covers slab tracking from the furnace delivery to the coilers, mill pacing, roughing and finishing mill set up, coiling temperature control, and data logging. Finishing mill set up is the most important one, and strenuous exertion has been made toward developing the method of predicting roll force. A method based on R.B.Sims' equation, which is simple and that with good accuracy, has been obtained. Standard deviation of roll force prediction is 5%. As for the gauge accuracy, 95% of the first bars of lots, which ware rolled by computer set up, fell within ±100μ of gauge deviation at the leading end of strip. Advantage of the computer control is reflected on 15t/h productivity improvement, 0.1% rolling yield improvement, 0.15% inspection yield improvement, 12 men saving and more stable operations.
本文(PDF: 17P/560kb)




(c)JFE Steel Corporation, 2003