■■■■■■■■■■■■■■■■■■■
川崎製鉄技報
KAWASAKI STEEL GIHO
Vol.3 (1971) No.2
■■■■■■■■■■■■■■■■■■■

3.5% Ni鋼KLN 3AおよびKLN 3B
3.5% Ni Steel -KLN 3A and KLN 3B

有村 康男(Yasuo Arimura) 大橋 卓朗(Takuro Ohashi) 近藤  一(Hajime Kondo) 荘司 吉信(Yoshinobu Syoji)
要旨 :
3.5%Ni鋼KLN3AおよびKLN 3Bはエチレンや液化石油ガスの低温貯蔵タンク用鋼板として川崎製鉄(株)で製造されたものである。この報文は,これらの鋼板の開発経過,製造法の概要,母材特性,溶接性および加工性について述べている。熱処理はKLN 3Aは焼ならし,KLN 3Bは焼入れ,焼もどしである。KLN 3A(板厚26mm,70mm),KLN 3B(板厚32mm)は-100℃ですぐれた靱性を有し,また十分な強度,そして溶接構造物用鋼板として十分な溶接性を有している。
Synopsis :
3.5% Ni Steel-KLN 3A and 3B have been developed and successfully industrialized by Kawasaki Steel Corporation for low temperature storage tank of ethylene and liquified petroleum gas. This paper reports on the progress of this development, an outline of the manufacturing process, the results of mechanical tests, formability tests and weldability tests of these steels. KLN 3A is normalized and KLN 3B is quench-tempered. Test results show that KLN 3A(26 ;70mm thick) and KLN 3B(32mm thick) have an excellent toughness at -100℃, a satisfactory strength and a sufficient weldability well suited for welded structures.
本文(PDF: 17P/550kb)




(c)JFE Steel Corporation, 2003